Tutorial: semantic search with ELSERedit

Elastic Learned Sparse EncodeR - or ELSER - is an NLP model trained by Elastic that enables you to perform semantic search by using sparse vector representation. Instead of literal matching on search terms, semantic search retrieves results based on the intent and the contextual meaning of a search query.

The instructions in this tutorial shows you how to use ELSER to perform semantic search on your data.

Only the first 512 extracted tokens per field are considered during semantic search with ELSER v1. Refer to this page for more information.

Requirementsedit

To perform semantic search by using ELSER, you must have the NLP model deployed in your cluster. Refer to the ELSER documentation to learn how to download and deploy the model.

The minimum dedicated ML node size for deploying and using the ELSER model is 4 GB in Elasticsearch Service if deployment autoscaling is turned off. Turning on autoscaling is recommended because it allows your deployment to dynamically adjust resources based on demand. Better performance can be achieved by using more allocations or more threads per allocation, which requires bigger ML nodes. Autoscaling provides bigger nodes when required. If autoscaling is turned off, you must provide suitably sized nodes yourself.

Create the index mappingedit

First, the mapping of the destination index - the index that contains the tokens that the model created based on your text - must be created. The destination index must have a field with the rank_features field type to index the ELSER output.

ELSER output must be ingested into a field with the rank_features field type. Otherwise, Elasticsearch interprets the token-weight pairs as a massive amount of fields in a document. If you get an error similar to this "Limit of total fields [1000] has been exceeded while adding new fields" then the ELSER output field is not mapped properly and it has a field type different than rank_features.

PUT my-index
{
  "mappings": {
    "properties": {
      "ml.tokens": { 
        "type": "rank_features" 
      },
      "text": { 
        "type": "text" 
      }
    }
  }
}

The name of the field to contain the generated tokens.

The field to contain the tokens is a rank_features field.

The name of the field from which to create the sparse vector representation. In this example, the name of the field is text.

The field type which is text in this example.

To learn how to optimize space, refer to the Saving disk space by excluding the ELSER tokens from document source section.

Create an ingest pipeline with an inference processoredit

Create an ingest pipeline with an inference processor to use ELSER to infer against the data that is being ingested in the pipeline.

PUT _ingest/pipeline/elser-v1-test
{
  "processors": [
    {
      "inference": {
        "model_id": ".elser_model_1",
        "target_field": "ml",
        "field_map": { 
          "text": "text_field"
        },
        "inference_config": {
          "text_expansion": { 
            "results_field": "tokens"
          }
        }
      }
    }
  ]
}

The field_map object maps the input document field name (which is text in this example) to the name of the field that the model expects (which is always text_field).

The text_expansion inference type needs to be used in the inference ingest processor.

Load dataedit

In this step, you load the data that you later use in the inference ingest pipeline to extract tokens from it.

Use the msmarco-passagetest2019-top1000 data set, which is a subset of the MS MARCO Passage Ranking data set. It consists of 200 queries, each accompanied by a list of relevant text passages. All unique passages, along with their IDs, have been extracted from that data set and compiled into a tsv file.

Download the file and upload it to your cluster using the Data Visualizer in the Machine Learning UI. Assign the name id to the first column and text to the second column. The index name is test-data. Once the upload is complete, you can see an index named test-data with 182469 documents.

Ingest the data through the inference ingest pipelineedit

Create the tokens from the text by reindexing the data throught the inference pipeline that uses ELSER as the inference model.

POST _reindex?wait_for_completion=false
{
  "source": {
    "index": "test-data",
    "size": 50 
  },
  "dest": {
    "index": "my-index",
    "pipeline": "elser-v1-test"
  }
}

The default batch size for reindexing is 1000. Reducing size to a smaller number makes the update of the reindexing process quicker which enables you to follow the progress closely and detect errors early.

The call returns a task ID to monitor the progress:

GET _tasks/<task_id>

You can also open the Trained Models UI, select the Pipelines tab under ELSER to follow the progress.

Semantic search by using the text_expansion queryedit

To perform semantic search, use the text_expansion query, and provide the query text and the ELSER model ID. The example below uses the query text "How to avoid muscle soreness after running?", the ml.tokens field contains the generated ELSER output:

GET my-index/_search
{
   "query":{
      "text_expansion":{
         "ml.tokens":{
            "model_id":".elser_model_1",
            "model_text":"How to avoid muscle soreness after running?"
         }
      }
   }
}

The result is the top 10 documents that are closest in meaning to your query text from the my-index index sorted by their relevancy. The result also contains the extracted tokens for each of the relevant search results with their weights.

"hits":[
   {
      "_index":"my-index",
      "_id":"978UAYgBKCQMet06sLEy",
      "_score":18.612831,
      "_ignored":[
         "text.keyword"
      ],
      "_source":{
         "id":7361587,
         "text":"For example, if you go for a run, you will mostly use the muscles in your lower body. Give yourself 2 days to rest those muscles so they have a chance to heal before you exercise them again. Not giving your muscles enough time to rest can cause muscle damage, rather than muscle development.",
         "ml":{
            "tokens":{
               "muscular":0.075696334,
               "mostly":0.52380747,
               "practice":0.23430172,
               "rehab":0.3673556,
               "cycling":0.13947526,
               "your":0.35725075,
               "years":0.69484913,
               "soon":0.005317828,
               "leg":0.41748235,
               "fatigue":0.3157955,
               "rehabilitation":0.13636169,
               "muscles":1.302141,
               "exercises":0.36694175,
               (...)
            },
            "model_id":".elser_model_1"
         }
      }
   },
   (...)
]

To learn about optimizing your text_expansion query, refer to Optimizing the search performance of the text_expansion query.

Combining semantic search with other queriesedit

You can combine text_expansion with other queries in a compound query. For example using a filter clause in a Boolean or a full text query which may or may not use the same query text as the text_expansion query. This enables you to combine the search results from both queries.

The search hits from the text_expansion query tend to score higher than other Elasticsearch queries. Those scores can be regularized by increasing or decreasing the relevance scores of each query by using the boost parameter. Recall on the text_expansion query can be high where there is a long tail of less relevant results. Use the min_score parameter to prune those less relevant documents.

GET my-index/_search
{
  "query": {
    "bool": { 
      "should": [
        {
          "text_expansion": {
            "ml.tokens": {
              "model_text": "How to avoid muscle soreness after running?",
              "model_id": ".elser_model_1",
              "boost": 1 
            }
          }
        },
        {
          "query_string": {
            "query": "toxins",
            "boost": 4 
          }
        }
      ]
    }
  },
  "min_score": 10 
}

Both the text_expansion and the query_string queries are in a should clause of a bool query.

The boost value is 1 for the text_expansion query which is the default value. This means that the relevance score of the results of this query are not boosted.

The boost value is 4 for the query_string query. The relevance score of the results of this query is increased causing them to rank higher in the search results.

Only the results with a score equal to or higher than 10 are displayed.

Optimizing performanceedit

Saving disk space by excluding the ELSER tokens from document sourceedit

The tokens generated by ELSER must be indexed for use in the text_expansion query. However, it is not necessary to retain those terms in the document source. You can save disk space by using the source exclude mapping to remove the ELSER terms from the document source.

Reindex uses the document source to populate the destination index. Once the ELSER terms have been excluded from the source, they cannot be recovered through reindexing. Excluding the tokens from the source is a space-saving optimsation that should only be applied if you are certain that reindexing will not be required in the future! It’s important to carefully consider this trade-off and make sure that excluding the ELSER terms from the source aligns with your specific requirements and use case.

The mapping that excludes ml.tokens from the _source field can be created by the following API call:

PUT my-index
{
  "mappings": {
    "_source": {
      "excludes": [
        "ml.tokens"
      ]
    },
    "properties": {
      "ml.tokens": {
        "type": "rank_features"
      },
      "text": {
        "type": "text"
      }
    }
  }
}

Further readingedit

Interactive exampleedit