SmartJoins

SmartJoins are only available in the Enterprise Edition, including the ArangoGraph Insights Platform.

SmartJoins allow to execute co-located join operations among identically sharded collections.

arangosearch Views are eligible for SmartJoins, provided that their underlying collections are eligible too.

Cluster joins without being smart

When doing joins in an ArangoDB cluster, data has to be exchanged between different servers. Joins between different collections in a cluster normally require roundtrips between the shards of these collections for fetching the data. Requests are routed through an extra Coordinator hop.

For example, with two collections c1 and c2 with 4 shards each, the Coordinator initially contacts the 4 shards of c1. In order to perform the join, the DB-Server nodes which manage the actual data of c1 need to pull the data from the other collection, c2. This causes extra roundtrips via the Coordinator, which then pulls the data for c2 from the responsible shards:

arangosh> db._explain("FOR doc1 IN c1 FOR doc2 IN c2 FILTER doc1._key == doc2._key RETURN doc1");

Query String:
  FOR doc1 IN c1 FOR doc2 IN c2 FILTER doc1._key == doc2._key RETURN doc1

Execution plan:
  Id   NodeType                  Site  Est.   Comment
   1   SingletonNode             DBS      1   * ROOT
   3   EnumerateCollectionNode   DBS      0     - FOR doc2 IN c2   /* full collection scan, 4 shard(s) */
  14   RemoteNode                COOR     0       - REMOTE
  15   GatherNode                COOR     0       - GATHER
   8   ScatterNode               COOR     0       - SCATTER
   9   RemoteNode                DBS      0       - REMOTE
   7   IndexNode                 DBS      0       - FOR doc1 IN c1   /* primary index scan, 4 shard(s) */
  10   RemoteNode                COOR     0         - REMOTE
  11   GatherNode                COOR     0         - GATHER
   6   ReturnNode                COOR     0         - RETURN doc1

This is the general query execution, and it makes sense if there is no further information available about how the data is actually distributed to the individual shards. It works in case c1 and c2 have a different amount of shards, or use different shard keys or strategies. However, it comes with the additional cost of having to do 4 x 4 requests to perform the join.

Sharding two collections identically using distributeShardsLike

In the specific case that the two collections have the same number of shards, the data of the two collections can be co-located on the same server for the same shard key values. In this case, the extra hop via the Coordinator is not necessary.

The query optimizer removes the extra hop for the join in case it can prove that data for the two collections is co-located.

The first step is thus to make the two collections shard their data alike. This can be achieved by making the distributeShardsLike attribute of one of the collections refer to the other collection.

Here is an example setup for this, using arangosh:

arangosh> db._create("c1", {numberOfShards: 4, shardKeys: ["_key"]});
arangosh> db._create("c2", {shardKeys: ["_key"], distributeShardsLike: "c1"});

Now the collections c1 and c2 not only have the same shard keys, but they also locate their data for the same shard keys values on the same server.

Let’s check how the data actually gets distributed now. We first confirm that the two collections have 4 shards each, which in this example are evenly distributed across two servers:

arangosh> db.c1.shards(true)
{ 
  "s2011661" : [ 
    "PRMR-64d19f43-3aa0-4abb-81f6-4b9966d32175" 
  ], 
  "s2011662" : [ 
    "PRMR-5f30caa0-4c93-4fdd-98f3-a2130c1447df" 
  ], 
  "s2011663" : [ 
    "PRMR-64d19f43-3aa0-4abb-81f6-4b9966d32175" 
  ], 
  "s2011664" : [ 
    "PRMR-5f30caa0-4c93-4fdd-98f3-a2130c1447df" 
  ] 
}

arangosh> db.c2.shards(true)
{ 
  "s2011666" : [ 
    "PRMR-64d19f43-3aa0-4abb-81f6-4b9966d32175" 
  ], 
  "s2011667" : [ 
    "PRMR-5f30caa0-4c93-4fdd-98f3-a2130c1447df" 
  ], 
  "s2011668" : [ 
    "PRMR-64d19f43-3aa0-4abb-81f6-4b9966d32175" 
  ], 
  "s2011669" : [ 
    "PRMR-5f30caa0-4c93-4fdd-98f3-a2130c1447df" 
  ] 
}

Because we have told both collections that distribute their data alike, their shards are now also populated alike:

arangosh> for (i = 0; i < 100; ++i) { 
  db.c1.insert({ _key: "test" + i }); 
  db.c2.insert({ _key: "test" + i }); 
}

arangosh> db.c1.count(true);
{
  "s2011664" : 22,
  "s2011661" : 21,
  "s2011663" : 27,
  "s2011662" : 30
}

arangosh> db.c2.count(true);
{
  "s2011669" : 22,
  "s2011666" : 21,
  "s2011668" : 27,
  "s2011667" : 30
}

We can see that shard 1 of c1 (“s2011664”) has the same number of documents as shard 1 of c2 (“s20116692), that shard 2 of c1 (“s2011661”) has the same number of documents as shard2 of c2 (“s2011666”) etc. Additionally, we can see from the shard-to-server distribution above that the corresponding shards from c1 and c2 always reside on the same node. This is a precondition for running joins locally, and thanks to the effects of distributeShardsLike it is now satisfied!

SmartJoins using distributeShardsLike

With the two collections in place like this, an AQL query that uses a FILTER condition that refers from the shard key of the one collection to the shard key of the other collection and compares the two shard key values by equality is eligible for the query optimizer’s “smart-joins” optimization:

arangosh> db._explain("FOR doc1 IN c1 FOR doc2 IN c2 FILTER doc1._key == doc2._key RETURN doc1");

Query String:
  FOR doc1 IN c1 FOR doc2 IN c2 FILTER doc1._key == doc2._key RETURN doc1

Execution plan:
  Id   NodeType                  Site  Est.   Comment
   1   SingletonNode             DBS      1   * ROOT
   3   EnumerateCollectionNode   DBS      0     - FOR doc2 IN c2   /* full collection scan, 4 shard(s) */
   7   IndexNode                 DBS      0       - FOR doc1 IN c1   /* primary index scan, 4 shard(s) */
  10   RemoteNode                COOR     0         - REMOTE
  11   GatherNode                COOR     0         - GATHER 
   6   ReturnNode                COOR     0         - RETURN doc1

As can be seen above, the extra hop via the Coordinator is gone here, which means less cluster-internal traffic and a faster response time.

SmartJoins also work if the shard key of the second collection is not _key, and even for non-unique shard key values, e.g.:

arangosh> db._create("c1", {numberOfShards: 4, shardKeys: ["_key"]});
arangosh> db._create("c2", {shardKeys: ["parent"], distributeShardsLike: "c1"});
arangosh> db.c2.ensureIndex({ type: "hash", fields: ["parent"] });
arangosh> for (i = 0; i < 100; ++i) { 
  db.c1.insert({ _key: "test" + i }); 
  for (j = 0; j < 10; ++j) {
    db.c2.insert({ parent: "test" + i });
  }
}

arangosh> db._explain("FOR doc1 IN c1 FOR doc2 IN c2 FILTER doc1._key == doc2.parent RETURN doc1");

Query String:
  FOR doc1 IN c1 FOR doc2 IN c2 FILTER doc1._key == doc2.parent RETURN doc1

Execution plan:
  Id   NodeType                  Site  Est.   Comment
   1   SingletonNode             DBS      1   * ROOT
   3   EnumerateCollectionNode   DBS   2000     - FOR doc2 IN c2   /* full collection scan, 4 shard(s) */
   7   IndexNode                 DBS   2000       - FOR doc1 IN c1   /* primary index scan, 4 shard(s) */
  10   RemoteNode                COOR  2000         - REMOTE
  11   GatherNode                COOR  2000         - GATHER 
   6   ReturnNode                COOR  2000         - RETURN doc1

All above examples used two collections only. SmartJoins also work when joining more than two collections/Views which have the same data distribution enforced via their distributeShardsLike attribute and using the shard keys as the join criteria as shown above.

SmartJoins using smartJoinAttribute

In case the join on the second collection must be performed on a non-shard key attribute, there is the option to specify a smartJoinAttribute for the collection. Note that for this case, setting distributeShardsLike is still required here, and that only a single shardKeys attribute can be used. The single attribute name specified in the shardKeys attribute for the collection must end with a colon character then.

This smartJoinAttribute must be populated for all documents in the collection, and must always contain a string value. The value of the _key attribute for each document must consist of the value of the smartJoinAttribute, a colon character and then some other user-defined key component.

The setup thus becomes:

  arangosh> db._create("c1", {numberOfShards: 4, shardKeys: ["_key"]});
  arangosh> db._create("c2", {shardKeys: ["_key:"], smartJoinAttribute: "parent", distributeShardsLike: "c1"});
  arangosh> db.c2.ensureIndex({ type: "hash", fields: ["parent"] });
  arangosh> for (i = 0; i < 100; ++i) { 
    db.c1.insert({ _key: "test" + i }); 
    db.c2.insert({ _key: "test" + i + ":" + "ownKey" + i, parent: "test" + i }); 
  }

Failure to populate the smartJoinAttribute with a string or not at all leads to a document being rejected on insert, update or replace. Similarly, failure to prefix a document’s _key attribute value with the value of the smartJoinAttribute also leads to the document being rejected:

arangosh> db.c2.insert({ parent: 123 });
JavaScript exception in file './js/client/modules/@arangodb/arangosh.js' at 99,7: ArangoError 4008: SmartJoin attribute not given or invalid

arangosh> db.c2.insert({ _key: "123:test1", parent: "124" });
JavaScript exception in file './js/client/modules/@arangodb/arangosh.js' at 99,7: ArangoError 4007: shard key value must be prefixed with the value of the SmartJoin attribute

The join can now be performed via the collection’s smartJoinAttribute:

arangosh> db._explain("FOR doc1 IN c1 FOR doc2 IN c2 FILTER doc1._key == doc2.parent RETURN doc1")

Query String:
  FOR doc1 IN c1 FOR doc2 IN c2 FILTER doc1._key == doc2.parent RETURN doc1

Execution plan:
  Id   NodeType                  Site  Est.   Comment
   1   SingletonNode             DBS      1   * ROOT
   3   EnumerateCollectionNode   DBS    101     - FOR doc2 IN c2   /* full collection scan, 4 shard(s) */
   7   IndexNode                 DBS    101       - FOR doc1 IN c1   /* primary index scan, 4 shard(s) */
  10   RemoteNode                COOR   101         - REMOTE
  11   GatherNode                COOR   101         - GATHER 
   6   ReturnNode                COOR   101         - RETURN doc1

Restricting SmartJoins to a single shard

If a FILTER condition is used on one of the shard keys, the optimizer also tries to restrict the queries to just the required shards:

arangosh> db._explain("FOR doc1 IN c1 FOR doc2 IN c2 FILTER doc1._key == 'test' && doc1._key == doc2.value RETURN doc1");

Query String:
FOR doc1 IN c1 FOR doc2 IN c2 FILTER doc1._key == 'test' && doc1._key == doc2.value 
RETURN doc1

Execution plan:
Id   NodeType        Site  Est.   Comment
 1   SingletonNode   DBS      1   * ROOT
 8   IndexNode       DBS      1     - FOR doc1 IN c1   /* primary index scan, shard: s2010246 */
 7   IndexNode       DBS      1       - FOR doc2 IN c2   /* primary index scan, scan only, shard: s2010253 */
12   RemoteNode      COOR     1         - REMOTE
13   GatherNode      COOR     1         - GATHER 
 6   ReturnNode      COOR     1         - RETURN doc1

Limitations

The SmartJoins optimization is currently triggered only for data selection queries, but not for any data-manipulation operations such as INSERT, UPDATE, REPLACE, REMOVE or UPSERT, neither traversals or subqueries.

It is only applied when joining two collections with an identical sharding setup. This requires all involved but one collection to be created with its distributeShardsLike attribute pointing to the collection that is the exception. All collections forming a View must be sharded in the same way, otherwise the View is not eligible.

It is restricted to be used with simple shard key attributes (such as _key, productId), but not with nested attributes (e.g. name.first). There should be exactly one shard key attribute defined for each collection.

Finally, the SmartJoins optimization requires that the involved collections are joined on their shard key attributes (or smartJoinAttribute) using an equality comparison.