ArangoDB Server LDAP Options

LDAP authentication is only available in the Enterprise Edition, including the ArangoGraph Insights Platform.

Basics Concepts

The basic idea is that one can keep the user authentication setup for an ArangoDB instance (single or cluster) outside of ArangoDB in an LDAP server. A crucial feature of this is that one can add and withdraw users and permissions by only changing the LDAP server and in particular without touching the ArangoDB instance. Changes are effective in ArangoDB within a few minutes.

Since there are many different possible LDAP setups, we must support a variety of possibilities for authentication and authorization. Here is a short overview:

To map ArangoDB user names to LDAP users there are two authentication methods called “simple” and “search”. In the “simple” method the LDAP bind user is derived from the ArangoDB user name by prepending a prefix and appending a suffix. For example, a user “alice” could be mapped to the distinguished name uid=alice,dc=arangodb,dc=com to perform the LDAP bind and authentication. See Simple authentication method below for details and configuration options.

In the “search” method there are two phases. In Phase 1 a generic read-only admin LDAP user account is used to bind to the LDAP server first and search for an LDAP user matching the ArangoDB user name. In Phase 2, the actual authentication is then performed against the LDAP user that was found in phase 1. Both methods are sensible and are recommended to use in production. See Search authentication method below for details and configuration options.

Once the user is authenticated, there are now two methods for authorization: (a) “roles attribute” and (b) “roles search”.

In method (a) ArangoDB acquires a list of roles the authenticated LDAP user has from the LDAP server. The actual access rights to databases and collections for these roles are configured in ArangoDB itself. Users effectively have the union of all access rights of all roles they have. This method is probably the most common one for production use cases. It combines the advantages of managing users and roles outside of ArangoDB in the LDAP server with the fine grained access control within ArangoDB for the individual roles. See Roles attribute below for details about method (a) and for the associated configuration options.

Method (b) is very similar and only differs from (a) in the way the actual list of roles of a user is derived from the LDAP server. See Roles search below for details about method (b) and for the associated configuration options.

Fundamental options

The fundamental options for specifying how to access the LDAP server are the following:

  • --ldap.enabled this is a boolean option which must be set to true to activate the LDAP feature
  • --ldap.server is a string specifying the host name or IP address of the LDAP server
  • --ldap.port is an integer specifying the port the LDAP server is running on, the default is 389
  • --ldap.basedn specifies the base distinguished name under which the search takes place (can alternatively be set via --ldap.url)
  • --ldap.binddn and --ldap.bindpasswd are distinguished name and password for a read-only LDAP user to which ArangoDB can bind to search the LDAP server. Note that it is necessary to configure these for both the “simple” and “search” authentication methods, since even in the “simple” method, ArangoDB occasionally has to refresh the authorization information from the LDAP server even if the user session persists and no new authentication is needed! It is, however, allowed to leave both empty, but then the LDAP server must be readable with anonymous access.
  • --ldap.refresh-rate is a floating point value in seconds. The default is 300, which means that ArangoDB refreshes the authorization information for authenticated users after at most 5 minutes. This means that changes in the LDAP server like removed users or added or removed roles for a user are effective after at most 5 minutes.

Note that the --ldap.server and --ldap.port options can alternatively be specified in the --ldap.url string together with other configuration options. For details see Section “LDAP URLs” below.

Here is an example on how to configure the connection to the LDAP server, with anonymous bind:

--ldap.enabled=true \
--ldap.server=ldap.arangodb.com \
--ldap.basedn=dc=arangodb,dc=com

With this configuration ArangoDB binds anonymously to the LDAP server on host ldap.arangodb.com on the default port 389 and executes all searches under the base distinguished name dc=arangodb,dc=com.

If we need a user to read in LDAP here is the example for it:

--ldap.enabled=true \
--ldap.server=ldap.arangodb.com \
--ldap.basedn=dc=arangodb,dc=com \
--ldap.binddn=uid=arangoadmin,dc=arangodb,dc=com \
--ldap.bindpasswd=supersecretpassword

The connection is identical but the searches are executed with the given distinguished name in binddn.

Note here: The given user (or the anonymous one) needs at least read access on all user objects to find them and in the case of Roles search also read access on the objects storing the roles.

Up to this point ArangoDB can now connect to a given LDAP server but it is not yet able to authenticate users properly with it. For this pick one of the following two authentication methods.

LDAP URLs

As an alternative one can specify the values of multiple LDAP related configuration options by specifying a single LDAP URL. Here is an example:

--ldap.url ldap://ldap.arangodb.com:1234/dc=arangodb,dc=com?uid?sub

This one option has the combined effect of setting the following:

--ldap.server=ldap.arangodb.com \
--ldap.port=1234 \
--ldap.basedn=dc=arangodb,dc=com \
--ldap.searchAttribute=uid \
--ldap.searchScope=sub

That is, the LDAP URL consists of the LDAP server and port, a basedn, a searchAttribute, and a searchScope which can be one of base, one, or sub. There is also the possibility to use the ldaps protocol as in:

--ldap.url ldaps://ldap.arangodb.com:636/dc=arangodb,dc=com?uid?sub

This does exactly the same as the one above, except that it uses the LDAP over TLS protocol. This is a non-standard method which does not involve using the STARTTLS protocol. Note that this does not work in the Windows version! We suggest to use the ldap protocol and STARTTLS as described in the next section.

TLS options

TLS is not supported in the Windows version of ArangoDB!

To configure the usage of encrypted TLS to communicate with the LDAP server the following options are available:

  • --ldap.tls: the main switch to active TLS. can either be true (use TLS) or false (do not use TLS). It is switched off by default. If you switch this on and do not use the ldaps protocol via the LDAP URL, then ArangoDB uses the STARTTLS protocol to initiate TLS. This is the recommended approach.
  • --ldap.tls-version: the minimal TLS version that ArangoDB should accept. Available versions are 1.0, 1.1 and 1.2. The default is 1.2. If your LDAP server does not support Version 1.2, you have to change this setting.
  • --ldap.tls-cert-check-strategy: strategy to validate the LDAP server certificate. Available strategies are never, hard, demand, allow and try. The default is hard.
  • --ldap.tls-cacert-file: a file path to one or more (concatenated) certificate authority certificates in PEM format. As default no file path is configured. This certificate is used to validate the server response.
  • --ldap.tls-cacert-dir: a directory path to certificate authority certificates in c_rehash format. As default no directory path is configured.

Assuming you have the TLS CAcert file that is given to the server at /path/to/certificate.pem, here is an example on how to configure TLS:

--ldap.tls true \
--ldap.tls-cacert-file /path/to/certificate.pem

You can use TLS with any of the following authentication mechanisms.

Secondary server options (ldap2)

The ldap.* options configure the primary LDAP server. It is possible to configure a secondary server with the ldap2.* options to use it as a fail-over for the case that the primary server is not reachable, but also to let the primary servers handle some users and the secondary others.

Instead of --ldap.<OPTION> you need to specify --ldap2.<OPTION>. Authentication / authorization first checks the primary LDAP server. If this server cannot authenticate a user, it tries the secondary one.

It is possible to specify a file containing all users that the primary LDAP server is handling by specifying the option --ldap.responsible-for. This file must contain the usernames line-by-line. This is also supported for the secondary server, which can be used to exclude certain users completely.

Esoteric options

The following options can be used to configure advanced options for LDAP connectivity:

  • --ldap.serialized: whether or not calls into the underlying LDAP library should be serialized. This option can be used to work around thread-unsafe LDAP library functionality.
  • --ldap.serialize-timeout: sets the timeout value that is used when waiting to enter the LDAP library call serialization lock. This is only meaningful when --ldap.serialized has been set to true.
  • --ldap.retries: number of tries to attempt a connection. Setting this to values greater than one will make ArangoDB retry to contact the LDAP server in case no connection can be made initially.

Please note that some of the following options are platform-specific and may not work with all LDAP servers reliably:

  • --ldap.restart: whether or not the LDAP library should implicitly restart connections
  • --ldap.referrals: whether or not the LDAP library should implicitly chase referrals

The following options can be used to adjust the LDAP configuration on Linux and macOS platforms only, but does not work on Windows:

  • --ldap.debug: turn on internal OpenLDAP library output (warning: prints to stdout).
  • --ldap.timeout: timeout value (in seconds) for synchronous LDAP API calls (a value of 0 means default timeout).
  • --ldap.network-timeout: timeout value (in seconds) after which network operations following the initial connection return in case of no activity (a value of 0 means default timeout).
  • --ldap.async-connect: whether or not the connection to the LDAP library is done asynchronously.

Authentication methods

In order to authenticate users in LDAP we have two options available. We need to pick exactly one them.

Simple authentication method

The simple authentication method is used if and only if both the --ldap.prefix and --ldap.suffix configuration options are specified and are non-empty. In all other cases the “search” authentication method is used.

In the “simple” method the LDAP bind user is derived from the ArangoDB user name by prepending the value of the --ldap.prefix configuration option and by appending the value of the --ldap.suffix configuration option. For example, an ArangoDB user “alice” would be mapped to the distinguished name uid=alice,dc=arangodb,dc=com to perform the LDAP bind and authentication, if --ldap.prefix is set to uid= and --ldap.suffix is set to ,dc=arangodb,dc=com.

ArangoDB binds to the LDAP server and authenticates with the distinguished name and the password provided by the client. If the LDAP server successfully verifies the password then the user is authenticated.

If you want to use this method add the following example to your ArangoDB configuration together with the fundamental configuration:

--ldap.prefix uid= \
--ldap.suffix ,dc=arangodb,dc=com

This method authenticates an LDAP user with the distinguished name {PREFIX}{USERNAME}{SUFFIX}, in this case for the ArangoDB user alice. It searches for: uid=alice,dc=arangodb,dc=com. This distinguished name is used as {USER} for the roles later on.

Search authentication method

The search authentication method is used if at least one of the two options --ldap.prefix and --ldap.suffix is empty or not specified. ArangoDB uses the LDAP user credentials given by the --ldap.binddn and --ldap.bindpasswd to perform a search for LDAP users. In this case, the values of the options --ldap.basedn, --ldap.search-attribute, --ldap.search-filter and --ldap.search-scope are used in the following way:

  • --ldap.search-scope is an LDAP search scope with possible values base (just search the base distinguished name), sub (recursive search under the base distinguished name) or one (search the base’s immediate children) (default: sub)
  • --ldap.search-filter is an LDAP filter expression which limits the set of LDAP users being considered (default: objectClass=* which means all objects). The placeholder {USER} is replaced by the supplied username.
  • --ldap.search-attribute specifies the attribute in the user objects which is used to match the ArangoDB user name (default: uid)

Here is an example on how to configure the search method. Assume we have users like the following stored in LDAP:

dn: uid=alice,dc=arangodb,dc=com
uid: alice
objectClass: inetOrgPerson
objectClass: organizationalPerson
objectClass: top
objectClass: person

Where uid is the username used in ArangoDB, and we only search for objects of type person then we can add the following to our fundamental LDAP configuration:

--ldap.search-attribute=uid \
--ldap.search-filter=objectClass=person

This uses the sub search scope by default and finds all person objects where the uid is equal to the given username. From these, the dn is extracted and used as {USER} in the roles later on.

Fetching roles for a user

After authentication, the next step is to derive authorization information from the authenticated LDAP user. In order to fetch the roles and thereby the access rights for a user we again have two possible options and need to pick one of them. We can combine each authentication method with each role method. In any case a user can have no role or more than one. If a user has no role, the user does not get any access to ArangoDB at all. If a user has multiple roles with different rights, then the rights are combined and the strongest right wins. Example:

  • alice has the roles project-a and project-b.
  • project-a has no access to collection BData.
  • project-b has rw access to collection BData,
  • hence alice has rw access on BData.

Note that the actual database and collection access rights are configured in ArangoDB itself by roles in the users module. The role name is always prefixed with :role:, e.g.: :role:project-a and :role:project-b respectively. You can use the normal user permissions tools in the Web interface or arangosh to configure these.

Roles attribute

The most important method for this is to read off the roles an LDAP user is associated with from an attribute in the LDAP user object. If the

--ldap.roles-attribute-name

configuration option is set, then the value of that option is the name of the attribute being used.

Here is the example to add to the overall configuration:

--ldap.roles-attribute-name=role

If we have the user stored like the following in LDAP:

dn: uid=alice,dc=arangodb,dc=com
uid: alice
objectClass: inetOrgPerson
objectClass: organizationalPerson
objectClass: top
objectClass: person 
role: project-a
role: project-b

Then the request grants the roles project-a and project-b for the user alice after successful authentication, as they are stored within the role on the user object.

An alternative method for authorization is to conduct a search in the LDAP server for LDAP objects representing roles a user has. If the

--ldap.roles-search=<search-expression>

configuration option is given, then the string {USER} in <search-expression> is replaced with the distinguished name of the authenticated LDAP user and the resulting search expression is used to match distinguished names of LDAP objects representing roles of that user.

Example:

--ldap.roles-search '(&(objectClass=groupOfUniqueNames)(uniqueMember={USER}))'

After a LDAP user is found and authenticated as described in the authentication section above, the {USER} in the search expression is replaced by its distinguished name, e.g. uid=alice,dc=arangodb,dc=com, and thus with the above search expression the actual search expression ends up being:

(&(objectClass=groupOfUniqueNames)(uniqueMember=uid=alice,dc=arangodb,dc=com}))

This search finds all objects of groupOfUniqueNames where at least one uniqueMember has the dn of alice. The list of results of that search would be the list of roles given by the values of the dn attributes of the found role objects.

Role transformations and filters

For both of the above authorization methods there are further configuration options to tune the role lookup. In this section we describe these further options:

  • --ldap.roles-include can be used to specify a regular expression that is used to filter roles. Only roles that match the regular expression are used.

  • --ldap.roles-exclude can be used to specify a regular expression that is used to filter roles. Only roles that do not match the regular expression are used.

  • --ldap.roles-transformation can be used to specify a regular expression and replacement text as /re/text/. This regular expression is applied to the role name found. This is especially useful in the roles-search variant to extract the real role name out of the dn value.

  • --ldap.superuser-role can be used to specify the role associated with the superuser. Any user belonging to this role gains superuser status. This role is checked after applying the roles-transformation expression.

Example:

--ldap.roles-include "^arangodb"

This setting only considers roles that start with arangodb.

--ldap.roles-exclude=disabled

This setting only considers roles that do contain the word disabled.

--ldap.superuser-role "arangodb-admin"

Anyone belonging to the group arangodb-admin become a superuser.

The roles-transformation deserves a larger example. Assume we are using roles search and have stored roles in the following way:

dn: cn=project-a,dc=arangodb,dc=com
objectClass: top
objectClass: groupOfUniqueNames
uniqueMember: uid=alice,dc=arangodb,dc=com
uniqueMember: uid=bob,dc=arangodb,dc=com
cn: project-a
description: Internal project A

dn: cn=project-b,dc=arangodb,dc=com
objectClass: top
objectClass: groupOfUniqueNames
uniqueMember: uid=alice,dc=arangodb,dc=com
uniqueMember: uid=charlie,dc=arangodb,dc=com
cn: project-b
description: External project B

In this case, we find cn=project-a,dc=arangodb,dc=com as one role of alice. However, we actually want to configure a role name :role:project-a, which is easier to read and maintain for our administrators.

If we now apply the following transformation:

--ldap.roles-transformation=/^cn=([^,]*),.*$/$1/

The regex extracts out project-a respectively project-b of the dn attribute.

In combination with the superuser-role we could make all project-a members arangodb admins by using:

--ldap.roles-transformation=/^cn=([^,]*),.*$/$1/ \
--ldap.superuser-role=project-a

Complete configuration examples

In this section we would like to present complete examples for a successful LDAP configuration of ArangoDB. All of the following are just combinations of the details described above.

Simple authentication with role-search, using anonymous LDAP user

This example connects to the LDAP server with an anonymous read-only user. We use the simple authentication mode (prefix + suffix) to authenticate users and apply a role search for groupOfUniqueNames objects where the user is a uniqueMember. Furthermore we extract only the cn out of the distinguished role name.

--ldap.enabled=true \
--ldap.server=ldap.arangodb.com \
--ldap.basedn=dc=arangodb,dc=com \
--ldap.prefix uid= \
--ldap.suffix ,dc=arangodb,dc=com \
--ldap.roles-search '(&(objectClass=groupOfUniqueNames)(uniqueMember={USER}))' \
--ldap.roles-transformation=/^cn=([^,]*),.*$/$1/ \
--ldap.superuser-role=project-a

Search authentication with roles attribute using LDAP admin user having TLS enabled

This example connects to the LDAP server with a given distinguished name of an admin user + password. Furthermore we activate TLS and give the certificate file to validate server responses. We use the search authentication searching for the uid attribute of person objects. These person objects have role attribute(s) containing the role(s) of a user.

--ldap.enabled=true \
--ldap.server=ldap.arangodb.com \
--ldap.basedn=dc=arangodb,dc=com \
--ldap.binddn=uid=arangoadmin,dc=arangodb,dc=com \
--ldap.bindpasswd=supersecretpassword \
--ldap.tls true \
--ldap.tls-cacert-file /path/to/certificate.pem \
--ldap.search-attribute=uid \
--ldap.search-filter=objectClass=person \
--ldap.roles-attribute-name=role
❮  Options

© ArangoDB - Graph and Beyond