The MPNet model was proposed in MPNet: Masked and Permuted Pre-training for Language Understanding by Kaitao Song, Xu Tan, Tao Qin, Jianfeng Lu, Tie-Yan Liu.
MPNet adopts a novel pre-training method, named masked and permuted language modeling, to inherit the advantages of masked language modeling and permuted language modeling for natural language understanding.
The abstract from the paper is the following:
BERT adopts masked language modeling (MLM) for pre-training and is one of the most successful pre-training models. Since BERT neglects dependency among predicted tokens, XLNet introduces permuted language modeling (PLM) for pre-training to address this problem. However, XLNet does not leverage the full position information of a sentence and thus suffers from position discrepancy between pre-training and fine-tuning. In this paper, we propose MPNet, a novel pre-training method that inherits the advantages of BERT and XLNet and avoids their limitations. MPNet leverages the dependency among predicted tokens through permuted language modeling (vs. MLM in BERT), and takes auxiliary position information as input to make the model see a full sentence and thus reducing the position discrepancy (vs. PLM in XLNet). We pre-train MPNet on a large-scale dataset (over 160GB text corpora) and fine-tune on a variety of down-streaming tasks (GLUE, SQuAD, etc). Experimental results show that MPNet outperforms MLM and PLM by a large margin, and achieves better results on these tasks compared with previous state-of-the-art pre-trained methods (e.g., BERT, XLNet, RoBERTa) under the same model setting.
The original code can be found here.
MPNet doesn’t have token_type_ids, you don’t need to indicate which token belongs to which segment. Just
separate your segments with the separation token tokenizer.sep_token (or [sep]).
( vocab_size = 30527 hidden_size = 768 num_hidden_layers = 12 num_attention_heads = 12 intermediate_size = 3072 hidden_act = 'gelu' hidden_dropout_prob = 0.1 attention_probs_dropout_prob = 0.1 max_position_embeddings = 512 initializer_range = 0.02 layer_norm_eps = 1e-12 relative_attention_num_buckets = 32 pad_token_id = 1 bos_token_id = 0 eos_token_id = 2 **kwargs )
Parameters
int, optional, defaults to 30527) —
Vocabulary size of the MPNet model. Defines the number of different tokens that can be represented by the
inputs_ids passed when calling MPNetModel or TFMPNetModel. int, optional, defaults to 768) —
Dimensionality of the encoder layers and the pooler layer. int, optional, defaults to 12) —
Number of hidden layers in the Transformer encoder. int, optional, defaults to 12) —
Number of attention heads for each attention layer in the Transformer encoder. int, optional, defaults to 3072) —
Dimensionality of the “intermediate” (often named feed-forward) layer in the Transformer encoder. str or Callable, optional, defaults to "gelu") —
The non-linear activation function (function or string) in the encoder and pooler. If string, "gelu",
"relu", "silu" and "gelu_new" are supported. float, optional, defaults to 0.1) —
The dropout probability for all fully connected layers in the embeddings, encoder, and pooler. float, optional, defaults to 0.1) —
The dropout ratio for the attention probabilities. int, optional, defaults to 512) —
The maximum sequence length that this model might ever be used with. Typically set this to something large
just in case (e.g., 512 or 1024 or 2048). float, optional, defaults to 0.02) —
The standard deviation of the truncated_normal_initializer for initializing all weight matrices. float, optional, defaults to 1e-12) —
The epsilon used by the layer normalization layers. int, optional, defaults to 32) —
The number of buckets to use for each attention layer. This is the configuration class to store the configuration of a MPNetModel or a TFMPNetModel. It is used to instantiate a MPNet model according to the specified arguments, defining the model architecture. Instantiating a configuration with the defaults will yield a similar configuration to that of the MPNet microsoft/mpnet-base architecture.
Configuration objects inherit from PretrainedConfig and can be used to control the model outputs. Read the documentation from PretrainedConfig for more information.
Examples:
>>> from transformers import MPNetModel, MPNetConfig
>>> # Initializing a MPNet mpnet-base style configuration
>>> configuration = MPNetConfig()
>>> # Initializing a model from the mpnet-base style configuration
>>> model = MPNetModel(configuration)
>>> # Accessing the model configuration
>>> configuration = model.config( vocab_file do_lower_case = True do_basic_tokenize = True never_split = None bos_token = '<s>' eos_token = '</s>' sep_token = '</s>' cls_token = '<s>' unk_token = '[UNK]' pad_token = '<pad>' mask_token = '<mask>' tokenize_chinese_chars = True strip_accents = None **kwargs )
Parameters
str) —
Path to the vocabulary file. bool, optional, defaults to True) —
Whether or not to lowercase the input when tokenizing. bool, optional, defaults to True) —
Whether or not to do basic tokenization before WordPiece. Iterable, optional) —
Collection of tokens which will never be split during tokenization. Only has an effect when
do_basic_tokenize=True str, optional, defaults to "<s>") —
The beginning of sequence token that was used during pre-training. Can be used a sequence classifier token.
When building a sequence using special tokens, this is not the token that is used for the beginning of
sequence. The token used is the cls_token.
str, optional, defaults to "</s>") —
The end of sequence token.
When building a sequence using special tokens, this is not the token that is used for the end of sequence.
The token used is the sep_token.
str, optional, defaults to "</s>") —
The separator token, which is used when building a sequence from multiple sequences, e.g. two sequences for
sequence classification or for a text and a question for question answering. It is also used as the last
token of a sequence built with special tokens. str, optional, defaults to "<s>") —
The classifier token which is used when doing sequence classification (classification of the whole sequence
instead of per-token classification). It is the first token of the sequence when built with special tokens. str, optional, defaults to "[UNK]") —
The unknown token. A token that is not in the vocabulary cannot be converted to an ID and is set to be this
token instead. str, optional, defaults to "<pad>") —
The token used for padding, for example when batching sequences of different lengths. str, optional, defaults to "<mask>") —
The token used for masking values. This is the token used when training this model with masked language
modeling. This is the token which the model will try to predict. bool, optional, defaults to True) —
Whether or not to tokenize Chinese characters.
This should likely be deactivated for Japanese (see this issue).
bool, optional) —
Whether or not to strip all accents. If this option is not specified, then it will be determined by the
value for lowercase (as in the original BERT). This tokenizer inherits from BertTokenizer which contains most of the methods. Users should refer to the superclass for more information regarding methods.
( token_ids_0: List token_ids_1: Optional = None ) → List[int]
Parameters
List[int]) —
List of IDs to which the special tokens will be added List[int], optional) —
Optional second list of IDs for sequence pairs. Returns
List[int]
list of input IDs with the appropriate special tokens.
Build model inputs from a sequence or a pair of sequence for sequence classification tasks by concatenating and adding special tokens. A MPNet sequence has the following format:
<s> X </s><s> A </s></s> B </s>( token_ids_0: List token_ids_1: Optional = None already_has_special_tokens: bool = False ) → List[int]
Parameters
List[int]) —
List of ids. List[int], optional) —
Optional second list of IDs for sequence pairs. bool, optional, defaults to False) —
Set to True if the token list is already formatted with special tokens for the model Returns
List[int]
A list of integers in the range [0, 1]: 1 for a special token, 0 for a sequence token.
Retrieves sequence ids from a token list that has no special tokens added. This method is called when adding
special tokens using the tokenizer prepare_for_model methods.
( token_ids_0: List token_ids_1: Optional = None ) → List[int]
Creates a mask from the two sequences passed to be used in a sequence-pair classification task. MPNet does not make use of token type ids, therefore a list of zeros is returned.
( vocab_file = None tokenizer_file = None do_lower_case = True bos_token = '<s>' eos_token = '</s>' sep_token = '</s>' cls_token = '<s>' unk_token = '[UNK]' pad_token = '<pad>' mask_token = '<mask>' tokenize_chinese_chars = True strip_accents = None **kwargs )
Parameters
str) —
File containing the vocabulary. bool, optional, defaults to True) —
Whether or not to lowercase the input when tokenizing. str, optional, defaults to "<s>") —
The beginning of sequence token that was used during pretraining. Can be used a sequence classifier token.
When building a sequence using special tokens, this is not the token that is used for the beginning of
sequence. The token used is the cls_token.
str, optional, defaults to "</s>") —
The end of sequence token.
When building a sequence using special tokens, this is not the token that is used for the end of sequence.
The token used is the sep_token.
str, optional, defaults to "</s>") —
The separator token, which is used when building a sequence from multiple sequences, e.g. two sequences for
sequence classification or for a text and a question for question answering. It is also used as the last
token of a sequence built with special tokens. str, optional, defaults to "<s>") —
The classifier token which is used when doing sequence classification (classification of the whole sequence
instead of per-token classification). It is the first token of the sequence when built with special tokens. str, optional, defaults to "[UNK]") —
The unknown token. A token that is not in the vocabulary cannot be converted to an ID and is set to be this
token instead. str, optional, defaults to "<pad>") —
The token used for padding, for example when batching sequences of different lengths. str, optional, defaults to "<mask>") —
The token used for masking values. This is the token used when training this model with masked language
modeling. This is the token which the model will try to predict. bool, optional, defaults to True) —
Whether or not to tokenize Chinese characters. This should likely be deactivated for Japanese (see this
issue). bool, optional) —
Whether or not to strip all accents. If this option is not specified, then it will be determined by the
value for lowercase (as in the original BERT). Construct a “fast” MPNet tokenizer (backed by HuggingFace’s tokenizers library). Based on WordPiece.
This tokenizer inherits from PreTrainedTokenizerFast which contains most of the main methods. Users should refer to this superclass for more information regarding those methods.
( token_ids_0: List token_ids_1: Optional = None ) → List[int]
Creates a mask from the two sequences passed to be used in a sequence-pair classification task. MPNet does not make use of token type ids, therefore a list of zeros is returned
( config add_pooling_layer = True )
Parameters
The bare MPNet Model transformer outputting raw hidden-states without any specific head on top.
This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)
This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.
( input_ids: Optional = None attention_mask: Optional = None position_ids: Optional = None head_mask: Optional = None inputs_embeds: Optional = None output_attentions: Optional = None output_hidden_states: Optional = None return_dict: Optional = None **kwargs ) → transformers.modeling_outputs.BaseModelOutputWithPooling or tuple(torch.FloatTensor)
Parameters
torch.LongTensor of shape (batch_size, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.encode() and PreTrainedTokenizer.call() for details.
torch.FloatTensor of shape (batch_size, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
torch.LongTensor of shape (batch_size, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. Returns
transformers.modeling_outputs.BaseModelOutputWithPooling or tuple(torch.FloatTensor)
A transformers.modeling_outputs.BaseModelOutputWithPooling or a tuple of
torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various
elements depending on the configuration (MPNetConfig) and inputs.
last_hidden_state (torch.FloatTensor of shape (batch_size, sequence_length, hidden_size)) — Sequence of hidden-states at the output of the last layer of the model.
pooler_output (torch.FloatTensor of shape (batch_size, hidden_size)) — Last layer hidden-state of the first token of the sequence (classification token) after further processing
through the layers used for the auxiliary pretraining task. E.g. for BERT-family of models, this returns
the classification token after processing through a linear layer and a tanh activation function. The linear
layer weights are trained from the next sentence prediction (classification) objective during pretraining.
hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of torch.FloatTensor (one for the output of the embeddings, if the model has an embedding layer, +
one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the optional initial embedding outputs.
attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The MPNetModel forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example:
>>> from transformers import AutoTokenizer, MPNetModel
>>> import torch
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = MPNetModel.from_pretrained("microsoft/mpnet-base")
>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="pt")
>>> outputs = model(**inputs)
>>> last_hidden_states = outputs.last_hidden_state( input_ids: Optional = None attention_mask: Optional = None position_ids: Optional = None head_mask: Optional = None inputs_embeds: Optional = None labels: Optional = None output_attentions: Optional = None output_hidden_states: Optional = None return_dict: Optional = None ) → transformers.modeling_outputs.MaskedLMOutput or tuple(torch.FloatTensor)
Parameters
torch.LongTensor of shape (batch_size, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.encode() and PreTrainedTokenizer.call() for details.
torch.FloatTensor of shape (batch_size, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
torch.LongTensor of shape (batch_size, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. torch.LongTensor of shape (batch_size, sequence_length), optional) —
Labels for computing the masked language modeling loss. Indices should be in [-100, 0, ..., config.vocab_size] (see input_ids docstring) Tokens with indices set to -100 are ignored (masked), the
loss is only computed for the tokens with labels in [0, ..., config.vocab_size] Returns
transformers.modeling_outputs.MaskedLMOutput or tuple(torch.FloatTensor)
A transformers.modeling_outputs.MaskedLMOutput or a tuple of
torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various
elements depending on the configuration (MPNetConfig) and inputs.
loss (torch.FloatTensor of shape (1,), optional, returned when labels is provided) — Masked language modeling (MLM) loss.
logits (torch.FloatTensor of shape (batch_size, sequence_length, config.vocab_size)) — Prediction scores of the language modeling head (scores for each vocabulary token before SoftMax).
hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of torch.FloatTensor (one for the output of the embeddings, if the model has an embedding layer, +
one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the optional initial embedding outputs.
attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The MPNetForMaskedLM forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example:
>>> from transformers import AutoTokenizer, MPNetForMaskedLM
>>> import torch
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = MPNetForMaskedLM.from_pretrained("microsoft/mpnet-base")
>>> inputs = tokenizer("The capital of France is [MASK].", return_tensors="pt")
>>> with torch.no_grad():
... logits = model(**inputs).logits
>>> # retrieve index of [MASK]
>>> mask_token_index = (inputs.input_ids == tokenizer.mask_token_id)[0].nonzero(as_tuple=True)[0]
>>> predicted_token_id = logits[0, mask_token_index].argmax(axis=-1)
>>> labels = tokenizer("The capital of France is Paris.", return_tensors="pt")["input_ids"]
>>> # mask labels of non-[MASK] tokens
>>> labels = torch.where(inputs.input_ids == tokenizer.mask_token_id, labels, -100)
>>> outputs = model(**inputs, labels=labels)( config )
Parameters
MPNet Model transformer with a sequence classification/regression head on top (a linear layer on top of the pooled output) e.g. for GLUE tasks.
This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)
This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.
( input_ids: Optional = None attention_mask: Optional = None position_ids: Optional = None head_mask: Optional = None inputs_embeds: Optional = None labels: Optional = None output_attentions: Optional = None output_hidden_states: Optional = None return_dict: Optional = None ) → transformers.modeling_outputs.SequenceClassifierOutput or tuple(torch.FloatTensor)
Parameters
torch.LongTensor of shape (batch_size, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.encode() and PreTrainedTokenizer.call() for details.
torch.FloatTensor of shape (batch_size, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
torch.LongTensor of shape (batch_size, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. torch.LongTensor of shape (batch_size,), optional) —
Labels for computing the sequence classification/regression loss. Indices should be in [0, ..., config.num_labels - 1]. If config.num_labels == 1 a regression loss is computed (Mean-Square loss), If
config.num_labels > 1 a classification loss is computed (Cross-Entropy). Returns
transformers.modeling_outputs.SequenceClassifierOutput or tuple(torch.FloatTensor)
A transformers.modeling_outputs.SequenceClassifierOutput or a tuple of
torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various
elements depending on the configuration (MPNetConfig) and inputs.
loss (torch.FloatTensor of shape (1,), optional, returned when labels is provided) — Classification (or regression if config.num_labels==1) loss.
logits (torch.FloatTensor of shape (batch_size, config.num_labels)) — Classification (or regression if config.num_labels==1) scores (before SoftMax).
hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of torch.FloatTensor (one for the output of the embeddings, if the model has an embedding layer, +
one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the optional initial embedding outputs.
attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The MPNetForSequenceClassification forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example of single-label classification:
>>> import torch
>>> from transformers import AutoTokenizer, MPNetForSequenceClassification
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = MPNetForSequenceClassification.from_pretrained("microsoft/mpnet-base")
>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="pt")
>>> with torch.no_grad():
... logits = model(**inputs).logits
>>> predicted_class_id = logits.argmax().item()
>>> # To train a model on `num_labels` classes, you can pass `num_labels=num_labels` to `.from_pretrained(...)`
>>> num_labels = len(model.config.id2label)
>>> model = MPNetForSequenceClassification.from_pretrained("microsoft/mpnet-base", num_labels=num_labels)
>>> labels = torch.tensor([1])
>>> loss = model(**inputs, labels=labels).lossExample of multi-label classification:
>>> import torch
>>> from transformers import AutoTokenizer, MPNetForSequenceClassification
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = MPNetForSequenceClassification.from_pretrained("microsoft/mpnet-base", problem_type="multi_label_classification")
>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="pt")
>>> with torch.no_grad():
... logits = model(**inputs).logits
>>> predicted_class_ids = torch.arange(0, logits.shape[-1])[torch.sigmoid(logits).squeeze(dim=0) > 0.5]
>>> # To train a model on `num_labels` classes, you can pass `num_labels=num_labels` to `.from_pretrained(...)`
>>> num_labels = len(model.config.id2label)
>>> model = MPNetForSequenceClassification.from_pretrained(
... "microsoft/mpnet-base", num_labels=num_labels, problem_type="multi_label_classification"
... )
>>> labels = torch.sum(
... torch.nn.functional.one_hot(predicted_class_ids[None, :].clone(), num_classes=num_labels), dim=1
... ).to(torch.float)
>>> loss = model(**inputs, labels=labels).loss( config )
Parameters
MPNet Model with a multiple choice classification head on top (a linear layer on top of the pooled output and a softmax) e.g. for RocStories/SWAG tasks.
This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)
This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.
( input_ids: Optional = None attention_mask: Optional = None position_ids: Optional = None head_mask: Optional = None inputs_embeds: Optional = None labels: Optional = None output_attentions: Optional = None output_hidden_states: Optional = None return_dict: Optional = None ) → transformers.modeling_outputs.MultipleChoiceModelOutput or tuple(torch.FloatTensor)
Parameters
torch.LongTensor of shape (batch_size, num_choices, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.encode() and PreTrainedTokenizer.call() for details.
torch.FloatTensor of shape (batch_size, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
torch.LongTensor of shape (batch_size, num_choices, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
torch.FloatTensor of shape (batch_size, num_choices, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. torch.LongTensor of shape (batch_size,), optional) —
Labels for computing the multiple choice classification loss. Indices should be in [0, ..., num_choices-1] where num_choices is the size of the second dimension of the input tensors. (See
input_ids above) Returns
transformers.modeling_outputs.MultipleChoiceModelOutput or tuple(torch.FloatTensor)
A transformers.modeling_outputs.MultipleChoiceModelOutput or a tuple of
torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various
elements depending on the configuration (MPNetConfig) and inputs.
loss (torch.FloatTensor of shape (1,), optional, returned when labels is provided) — Classification loss.
logits (torch.FloatTensor of shape (batch_size, num_choices)) — num_choices is the second dimension of the input tensors. (see input_ids above).
Classification scores (before SoftMax).
hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of torch.FloatTensor (one for the output of the embeddings, if the model has an embedding layer, +
one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the optional initial embedding outputs.
attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The MPNetForMultipleChoice forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example:
>>> from transformers import AutoTokenizer, MPNetForMultipleChoice
>>> import torch
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = MPNetForMultipleChoice.from_pretrained("microsoft/mpnet-base")
>>> prompt = "In Italy, pizza served in formal settings, such as at a restaurant, is presented unsliced."
>>> choice0 = "It is eaten with a fork and a knife."
>>> choice1 = "It is eaten while held in the hand."
>>> labels = torch.tensor(0).unsqueeze(0) # choice0 is correct (according to Wikipedia ;)), batch size 1
>>> encoding = tokenizer([prompt, prompt], [choice0, choice1], return_tensors="pt", padding=True)
>>> outputs = model(**{k: v.unsqueeze(0) for k, v in encoding.items()}, labels=labels) # batch size is 1
>>> # the linear classifier still needs to be trained
>>> loss = outputs.loss
>>> logits = outputs.logits( config )
Parameters
MPNet Model with a token classification head on top (a linear layer on top of the hidden-states output) e.g. for Named-Entity-Recognition (NER) tasks.
This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)
This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.
( input_ids: Optional = None attention_mask: Optional = None position_ids: Optional = None head_mask: Optional = None inputs_embeds: Optional = None labels: Optional = None output_attentions: Optional = None output_hidden_states: Optional = None return_dict: Optional = None ) → transformers.modeling_outputs.TokenClassifierOutput or tuple(torch.FloatTensor)
Parameters
torch.LongTensor of shape (batch_size, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.encode() and PreTrainedTokenizer.call() for details.
torch.FloatTensor of shape (batch_size, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
torch.LongTensor of shape (batch_size, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. torch.LongTensor of shape (batch_size, sequence_length), optional) —
Labels for computing the token classification loss. Indices should be in [0, ..., config.num_labels - 1]. Returns
transformers.modeling_outputs.TokenClassifierOutput or tuple(torch.FloatTensor)
A transformers.modeling_outputs.TokenClassifierOutput or a tuple of
torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various
elements depending on the configuration (MPNetConfig) and inputs.
loss (torch.FloatTensor of shape (1,), optional, returned when labels is provided) — Classification loss.
logits (torch.FloatTensor of shape (batch_size, sequence_length, config.num_labels)) — Classification scores (before SoftMax).
hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of torch.FloatTensor (one for the output of the embeddings, if the model has an embedding layer, +
one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the optional initial embedding outputs.
attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The MPNetForTokenClassification forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example:
>>> from transformers import AutoTokenizer, MPNetForTokenClassification
>>> import torch
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = MPNetForTokenClassification.from_pretrained("microsoft/mpnet-base")
>>> inputs = tokenizer(
... "HuggingFace is a company based in Paris and New York", add_special_tokens=False, return_tensors="pt"
... )
>>> with torch.no_grad():
... logits = model(**inputs).logits
>>> predicted_token_class_ids = logits.argmax(-1)
>>> # Note that tokens are classified rather then input words which means that
>>> # there might be more predicted token classes than words.
>>> # Multiple token classes might account for the same word
>>> predicted_tokens_classes = [model.config.id2label[t.item()] for t in predicted_token_class_ids[0]]
>>> labels = predicted_token_class_ids
>>> loss = model(**inputs, labels=labels).loss( config )
Parameters
MPNet Model with a span classification head on top for extractive question-answering tasks like SQuAD (a linear
layers on top of the hidden-states output to compute span start logits and span end logits).
This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)
This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.
( input_ids: Optional = None attention_mask: Optional = None position_ids: Optional = None head_mask: Optional = None inputs_embeds: Optional = None start_positions: Optional = None end_positions: Optional = None output_attentions: Optional = None output_hidden_states: Optional = None return_dict: Optional = None ) → transformers.modeling_outputs.QuestionAnsweringModelOutput or tuple(torch.FloatTensor)
Parameters
torch.LongTensor of shape (batch_size, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.encode() and PreTrainedTokenizer.call() for details.
torch.FloatTensor of shape (batch_size, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
torch.LongTensor of shape (batch_size, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. torch.LongTensor of shape (batch_size,), optional) —
Labels for position (index) of the start of the labelled span for computing the token classification loss.
Positions are clamped to the length of the sequence (sequence_length). Position outside of the sequence
are not taken into account for computing the loss. torch.LongTensor of shape (batch_size,), optional) —
Labels for position (index) of the end of the labelled span for computing the token classification loss.
Positions are clamped to the length of the sequence (sequence_length). Position outside of the sequence
are not taken into account for computing the loss. Returns
transformers.modeling_outputs.QuestionAnsweringModelOutput or tuple(torch.FloatTensor)
A transformers.modeling_outputs.QuestionAnsweringModelOutput or a tuple of
torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various
elements depending on the configuration (MPNetConfig) and inputs.
loss (torch.FloatTensor of shape (1,), optional, returned when labels is provided) — Total span extraction loss is the sum of a Cross-Entropy for the start and end positions.
start_logits (torch.FloatTensor of shape (batch_size, sequence_length)) — Span-start scores (before SoftMax).
end_logits (torch.FloatTensor of shape (batch_size, sequence_length)) — Span-end scores (before SoftMax).
hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of torch.FloatTensor (one for the output of the embeddings, if the model has an embedding layer, +
one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the optional initial embedding outputs.
attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The MPNetForQuestionAnswering forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example:
>>> from transformers import AutoTokenizer, MPNetForQuestionAnswering
>>> import torch
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = MPNetForQuestionAnswering.from_pretrained("microsoft/mpnet-base")
>>> question, text = "Who was Jim Henson?", "Jim Henson was a nice puppet"
>>> inputs = tokenizer(question, text, return_tensors="pt")
>>> with torch.no_grad():
... outputs = model(**inputs)
>>> answer_start_index = outputs.start_logits.argmax()
>>> answer_end_index = outputs.end_logits.argmax()
>>> predict_answer_tokens = inputs.input_ids[0, answer_start_index : answer_end_index + 1]
>>> # target is "nice puppet"
>>> target_start_index = torch.tensor([14])
>>> target_end_index = torch.tensor([15])
>>> outputs = model(**inputs, start_positions=target_start_index, end_positions=target_end_index)
>>> loss = outputs.loss( config *inputs **kwargs )
Parameters
The bare MPNet Model transformer outputting raw hidden-states without any specific head on top.
This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)
This model is also a keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.
TensorFlow models and layers in transformers accept two formats as input:
The reason the second format is supported is that Keras methods prefer this format when passing inputs to models
and layers. Because of this support, when using methods like model.fit() things should “just work” for you - just
pass your inputs and labels in any format that model.fit() supports! If, however, you want to use the second
format outside of Keras methods like fit() and predict(), such as when creating your own layers or models with
the Keras Functional API, there are three possibilities you can use to gather all the input Tensors in the first
positional argument:
input_ids only and nothing else: model(input_ids)model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])model({"input_ids": input_ids, "token_type_ids": token_type_ids})Note that when creating models and layers with subclassing then you don’t need to worry about any of this, as you can just pass inputs like you would to any other Python function!
( input_ids: TFModelInputType | None = None attention_mask: Optional[Union[np.array, tf.Tensor]] = None position_ids: Optional[Union[np.array, tf.Tensor]] = None head_mask: Optional[Union[np.array, tf.Tensor]] = None inputs_embeds: tf.Tensor | None = None output_attentions: Optional[bool] = None output_hidden_states: Optional[bool] = None return_dict: Optional[bool] = None training: bool = False ) → transformers.modeling_tf_outputs.TFBaseModelOutput or tuple(tf.Tensor)
Parameters
Numpy array or tf.Tensor of shape (batch_size, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.call() and PreTrainedTokenizer.encode() for details.
Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
tf.Tensor of shape (batch_size, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the
config will be used instead. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. This argument can be used only in eager mode, in graph mode the value in the config will be
used instead. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in
eager mode, in graph mode the value will always be set to True. bool, optional, defaults to False) —
Whether or not to use the model in training mode (some modules like dropout modules have different
behaviors between training and evaluation). Returns
transformers.modeling_tf_outputs.TFBaseModelOutput or tuple(tf.Tensor)
A transformers.modeling_tf_outputs.TFBaseModelOutput or a tuple of tf.Tensor (if
return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the
configuration (MPNetConfig) and inputs.
last_hidden_state (tf.Tensor of shape (batch_size, sequence_length, hidden_size)) — Sequence of hidden-states at the output of the last layer of the model.
hidden_states (tuple(tf.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape
(batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the initial embedding outputs.
attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The TFMPNetModel forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example:
>>> from transformers import AutoTokenizer, TFMPNetModel
>>> import tensorflow as tf
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = TFMPNetModel.from_pretrained("microsoft/mpnet-base")
>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="tf")
>>> outputs = model(inputs)
>>> last_hidden_states = outputs.last_hidden_state( config *inputs **kwargs )
Parameters
MPNet Model with a language modeling head on top.
This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)
This model is also a keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.
TensorFlow models and layers in transformers accept two formats as input:
The reason the second format is supported is that Keras methods prefer this format when passing inputs to models
and layers. Because of this support, when using methods like model.fit() things should “just work” for you - just
pass your inputs and labels in any format that model.fit() supports! If, however, you want to use the second
format outside of Keras methods like fit() and predict(), such as when creating your own layers or models with
the Keras Functional API, there are three possibilities you can use to gather all the input Tensors in the first
positional argument:
input_ids only and nothing else: model(input_ids)model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])model({"input_ids": input_ids, "token_type_ids": token_type_ids})Note that when creating models and layers with subclassing then you don’t need to worry about any of this, as you can just pass inputs like you would to any other Python function!
( input_ids: TFModelInputType | None = None attention_mask: np.ndarray | tf.Tensor | None = None position_ids: np.ndarray | tf.Tensor | None = None head_mask: np.ndarray | tf.Tensor | None = None inputs_embeds: tf.Tensor | None = None output_attentions: Optional[bool] = None output_hidden_states: Optional[bool] = None return_dict: Optional[bool] = None labels: tf.Tensor | None = None training: bool = False ) → transformers.modeling_tf_outputs.TFMaskedLMOutput or tuple(tf.Tensor)
Parameters
Numpy array or tf.Tensor of shape (batch_size, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.call() and PreTrainedTokenizer.encode() for details.
Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
tf.Tensor of shape (batch_size, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the
config will be used instead. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. This argument can be used only in eager mode, in graph mode the value in the config will be
used instead. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in
eager mode, in graph mode the value will always be set to True. bool, optional, defaults to False) —
Whether or not to use the model in training mode (some modules like dropout modules have different
behaviors between training and evaluation). tf.Tensor of shape (batch_size, sequence_length), optional) —
Labels for computing the masked language modeling loss. Indices should be in [-100, 0, ..., config.vocab_size] (see input_ids docstring) Tokens with indices set to -100 are ignored (masked), the
loss is only computed for the tokens with labels in [0, ..., config.vocab_size] Returns
transformers.modeling_tf_outputs.TFMaskedLMOutput or tuple(tf.Tensor)
A transformers.modeling_tf_outputs.TFMaskedLMOutput or a tuple of tf.Tensor (if
return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the
configuration (MPNetConfig) and inputs.
loss (tf.Tensor of shape (n,), optional, where n is the number of non-masked labels, returned when labels is provided) — Masked language modeling (MLM) loss.
logits (tf.Tensor of shape (batch_size, sequence_length, config.vocab_size)) — Prediction scores of the language modeling head (scores for each vocabulary token before SoftMax).
hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape
(batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the initial embedding outputs.
attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The TFMPNetForMaskedLM forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example:
>>> from transformers import AutoTokenizer, TFMPNetForMaskedLM
>>> import tensorflow as tf
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = TFMPNetForMaskedLM.from_pretrained("microsoft/mpnet-base")
>>> inputs = tokenizer("The capital of France is [MASK].", return_tensors="tf")
>>> logits = model(**inputs).logits
>>> # retrieve index of [MASK]
>>> mask_token_index = tf.where((inputs.input_ids == tokenizer.mask_token_id)[0])
>>> selected_logits = tf.gather_nd(logits[0], indices=mask_token_index)
>>> predicted_token_id = tf.math.argmax(selected_logits, axis=-1)( config *inputs **kwargs )
Parameters
MPNet Model transformer with a sequence classification/regression head on top (a linear layer on top of the pooled output) e.g. for GLUE tasks.
This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)
This model is also a keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.
TensorFlow models and layers in transformers accept two formats as input:
The reason the second format is supported is that Keras methods prefer this format when passing inputs to models
and layers. Because of this support, when using methods like model.fit() things should “just work” for you - just
pass your inputs and labels in any format that model.fit() supports! If, however, you want to use the second
format outside of Keras methods like fit() and predict(), such as when creating your own layers or models with
the Keras Functional API, there are three possibilities you can use to gather all the input Tensors in the first
positional argument:
input_ids only and nothing else: model(input_ids)model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])model({"input_ids": input_ids, "token_type_ids": token_type_ids})Note that when creating models and layers with subclassing then you don’t need to worry about any of this, as you can just pass inputs like you would to any other Python function!
( input_ids: TFModelInputType | None = None attention_mask: Optional[Union[np.array, tf.Tensor]] = None position_ids: Optional[Union[np.array, tf.Tensor]] = None head_mask: Optional[Union[np.array, tf.Tensor]] = None inputs_embeds: tf.Tensor | None = None output_attentions: Optional[bool] = None output_hidden_states: Optional[bool] = None return_dict: Optional[bool] = None labels: tf.Tensor | None = None training: bool = False ) → transformers.modeling_tf_outputs.TFSequenceClassifierOutput or tuple(tf.Tensor)
Parameters
Numpy array or tf.Tensor of shape (batch_size, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.call() and PreTrainedTokenizer.encode() for details.
Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
tf.Tensor of shape (batch_size, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the
config will be used instead. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. This argument can be used only in eager mode, in graph mode the value in the config will be
used instead. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in
eager mode, in graph mode the value will always be set to True. bool, optional, defaults to False) —
Whether or not to use the model in training mode (some modules like dropout modules have different
behaviors between training and evaluation). tf.Tensor of shape (batch_size,), optional) —
Labels for computing the sequence classification/regression loss. Indices should be in [0, ..., config.num_labels - 1]. If config.num_labels == 1 a regression loss is computed (Mean-Square loss), If
config.num_labels > 1 a classification loss is computed (Cross-Entropy). Returns
transformers.modeling_tf_outputs.TFSequenceClassifierOutput or tuple(tf.Tensor)
A transformers.modeling_tf_outputs.TFSequenceClassifierOutput or a tuple of tf.Tensor (if
return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the
configuration (MPNetConfig) and inputs.
loss (tf.Tensor of shape (batch_size, ), optional, returned when labels is provided) — Classification (or regression if config.num_labels==1) loss.
logits (tf.Tensor of shape (batch_size, config.num_labels)) — Classification (or regression if config.num_labels==1) scores (before SoftMax).
hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape
(batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the initial embedding outputs.
attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The TFMPNetForSequenceClassification forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example:
>>> from transformers import AutoTokenizer, TFMPNetForSequenceClassification
>>> import tensorflow as tf
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = TFMPNetForSequenceClassification.from_pretrained("microsoft/mpnet-base")
>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="tf")
>>> logits = model(**inputs).logits
>>> predicted_class_id = int(tf.math.argmax(logits, axis=-1)[0])>>> # To train a model on `num_labels` classes, you can pass `num_labels=num_labels` to `.from_pretrained(...)`
>>> num_labels = len(model.config.id2label)
>>> model = TFMPNetForSequenceClassification.from_pretrained("microsoft/mpnet-base", num_labels=num_labels)
>>> labels = tf.constant(1)
>>> loss = model(**inputs, labels=labels).loss( config *inputs **kwargs )
Parameters
MPNet Model with a multiple choice classification head on top (a linear layer on top of the pooled output and a softmax) e.g. for RocStories/SWAG tasks.
This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)
This model is also a keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.
TensorFlow models and layers in transformers accept two formats as input:
The reason the second format is supported is that Keras methods prefer this format when passing inputs to models
and layers. Because of this support, when using methods like model.fit() things should “just work” for you - just
pass your inputs and labels in any format that model.fit() supports! If, however, you want to use the second
format outside of Keras methods like fit() and predict(), such as when creating your own layers or models with
the Keras Functional API, there are three possibilities you can use to gather all the input Tensors in the first
positional argument:
input_ids only and nothing else: model(input_ids)model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])model({"input_ids": input_ids, "token_type_ids": token_type_ids})Note that when creating models and layers with subclassing then you don’t need to worry about any of this, as you can just pass inputs like you would to any other Python function!
( input_ids: TFModelInputType | None = None attention_mask: np.ndarray | tf.Tensor | None = None position_ids: np.ndarray | tf.Tensor | None = None head_mask: np.ndarray | tf.Tensor | None = None inputs_embeds: tf.Tensor | None = None output_attentions: Optional[bool] = None output_hidden_states: Optional[bool] = None return_dict: Optional[bool] = None labels: tf.Tensor | None = None training: bool = False ) → transformers.modeling_tf_outputs.TFMultipleChoiceModelOutput or tuple(tf.Tensor)
Parameters
Numpy array or tf.Tensor of shape (batch_size, num_choices, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.call() and PreTrainedTokenizer.encode() for details.
Numpy array or tf.Tensor of shape (batch_size, num_choices, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
Numpy array or tf.Tensor of shape (batch_size, num_choices, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
tf.Tensor of shape (batch_size, num_choices, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the
config will be used instead. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. This argument can be used only in eager mode, in graph mode the value in the config will be
used instead. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in
eager mode, in graph mode the value will always be set to True. bool, optional, defaults to False) —
Whether or not to use the model in training mode (some modules like dropout modules have different
behaviors between training and evaluation). tf.Tensor of shape (batch_size,), optional) —
Labels for computing the multiple choice classification loss. Indices should be in [0, ..., num_choices]
where num_choices is the size of the second dimension of the input tensors. (See input_ids above) Returns
transformers.modeling_tf_outputs.TFMultipleChoiceModelOutput or tuple(tf.Tensor)
A transformers.modeling_tf_outputs.TFMultipleChoiceModelOutput or a tuple of tf.Tensor (if
return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the
configuration (MPNetConfig) and inputs.
loss (tf.Tensor of shape (batch_size, ), optional, returned when labels is provided) — Classification loss.
logits (tf.Tensor of shape (batch_size, num_choices)) — num_choices is the second dimension of the input tensors. (see input_ids above).
Classification scores (before SoftMax).
hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape
(batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the initial embedding outputs.
attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The TFMPNetForMultipleChoice forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example:
>>> from transformers import AutoTokenizer, TFMPNetForMultipleChoice
>>> import tensorflow as tf
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = TFMPNetForMultipleChoice.from_pretrained("microsoft/mpnet-base")
>>> prompt = "In Italy, pizza served in formal settings, such as at a restaurant, is presented unsliced."
>>> choice0 = "It is eaten with a fork and a knife."
>>> choice1 = "It is eaten while held in the hand."
>>> encoding = tokenizer([prompt, prompt], [choice0, choice1], return_tensors="tf", padding=True)
>>> inputs = {k: tf.expand_dims(v, 0) for k, v in encoding.items()}
>>> outputs = model(inputs) # batch size is 1
>>> # the linear classifier still needs to be trained
>>> logits = outputs.logits( config *inputs **kwargs )
Parameters
MPNet Model with a token classification head on top (a linear layer on top of the hidden-states output) e.g. for Named-Entity-Recognition (NER) tasks.
This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)
This model is also a keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.
TensorFlow models and layers in transformers accept two formats as input:
The reason the second format is supported is that Keras methods prefer this format when passing inputs to models
and layers. Because of this support, when using methods like model.fit() things should “just work” for you - just
pass your inputs and labels in any format that model.fit() supports! If, however, you want to use the second
format outside of Keras methods like fit() and predict(), such as when creating your own layers or models with
the Keras Functional API, there are three possibilities you can use to gather all the input Tensors in the first
positional argument:
input_ids only and nothing else: model(input_ids)model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])model({"input_ids": input_ids, "token_type_ids": token_type_ids})Note that when creating models and layers with subclassing then you don’t need to worry about any of this, as you can just pass inputs like you would to any other Python function!
( input_ids: TFModelInputType | None = None attention_mask: np.ndarray | tf.Tensor | None = None position_ids: np.ndarray | tf.Tensor | None = None head_mask: np.ndarray | tf.Tensor | None = None inputs_embeds: tf.Tensor | None = None output_attentions: Optional[bool] = None output_hidden_states: Optional[bool] = None return_dict: Optional[bool] = None labels: tf.Tensor | None = None training: bool = False ) → transformers.modeling_tf_outputs.TFTokenClassifierOutput or tuple(tf.Tensor)
Parameters
Numpy array or tf.Tensor of shape (batch_size, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.call() and PreTrainedTokenizer.encode() for details.
Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
tf.Tensor of shape (batch_size, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the
config will be used instead. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. This argument can be used only in eager mode, in graph mode the value in the config will be
used instead. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in
eager mode, in graph mode the value will always be set to True. bool, optional, defaults to False) —
Whether or not to use the model in training mode (some modules like dropout modules have different
behaviors between training and evaluation). tf.Tensor of shape (batch_size, sequence_length), optional) —
Labels for computing the token classification loss. Indices should be in [0, ..., config.num_labels - 1]. Returns
transformers.modeling_tf_outputs.TFTokenClassifierOutput or tuple(tf.Tensor)
A transformers.modeling_tf_outputs.TFTokenClassifierOutput or a tuple of tf.Tensor (if
return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the
configuration (MPNetConfig) and inputs.
loss (tf.Tensor of shape (n,), optional, where n is the number of unmasked labels, returned when labels is provided) — Classification loss.
logits (tf.Tensor of shape (batch_size, sequence_length, config.num_labels)) — Classification scores (before SoftMax).
hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape
(batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the initial embedding outputs.
attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The TFMPNetForTokenClassification forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example:
>>> from transformers import AutoTokenizer, TFMPNetForTokenClassification
>>> import tensorflow as tf
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = TFMPNetForTokenClassification.from_pretrained("microsoft/mpnet-base")
>>> inputs = tokenizer(
... "HuggingFace is a company based in Paris and New York", add_special_tokens=False, return_tensors="tf"
... )
>>> logits = model(**inputs).logits
>>> predicted_token_class_ids = tf.math.argmax(logits, axis=-1)
>>> # Note that tokens are classified rather then input words which means that
>>> # there might be more predicted token classes than words.
>>> # Multiple token classes might account for the same word
>>> predicted_tokens_classes = [model.config.id2label[t] for t in predicted_token_class_ids[0].numpy().tolist()]( config *inputs **kwargs )
Parameters
MPNet Model with a span classification head on top for extractive question-answering tasks like SQuAD (a linear
layers on top of the hidden-states output to compute span start logits and span end logits).
This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)
This model is also a keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.
TensorFlow models and layers in transformers accept two formats as input:
The reason the second format is supported is that Keras methods prefer this format when passing inputs to models
and layers. Because of this support, when using methods like model.fit() things should “just work” for you - just
pass your inputs and labels in any format that model.fit() supports! If, however, you want to use the second
format outside of Keras methods like fit() and predict(), such as when creating your own layers or models with
the Keras Functional API, there are three possibilities you can use to gather all the input Tensors in the first
positional argument:
input_ids only and nothing else: model(input_ids)model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])model({"input_ids": input_ids, "token_type_ids": token_type_ids})Note that when creating models and layers with subclassing then you don’t need to worry about any of this, as you can just pass inputs like you would to any other Python function!
( input_ids: TFModelInputType | None = None attention_mask: Optional[Union[np.array, tf.Tensor]] = None position_ids: Optional[Union[np.array, tf.Tensor]] = None head_mask: Optional[Union[np.array, tf.Tensor]] = None inputs_embeds: tf.Tensor | None = None output_attentions: Optional[bool] = None output_hidden_states: Optional[bool] = None return_dict: Optional[bool] = None start_positions: tf.Tensor | None = None end_positions: tf.Tensor | None = None training: bool = False **kwargs ) → transformers.modeling_tf_outputs.TFQuestionAnsweringModelOutput or tuple(tf.Tensor)
Parameters
Numpy array or tf.Tensor of shape (batch_size, sequence_length)) —
Indices of input sequence tokens in the vocabulary.
Indices can be obtained using AutoTokenizer. See PreTrainedTokenizer.call() and PreTrainedTokenizer.encode() for details.
Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) —
Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:
Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) —
Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].
Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) —
Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:
tf.Tensor of shape (batch_size, sequence_length, hidden_size), optional) —
Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This
is useful if you want more control over how to convert input_ids indices into associated vectors than the
model’s internal embedding lookup matrix. bool, optional) —
Whether or not to return the attentions tensors of all attention layers. See attentions under returned
tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the
config will be used instead. bool, optional) —
Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for
more detail. This argument can be used only in eager mode, in graph mode the value in the config will be
used instead. bool, optional) —
Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in
eager mode, in graph mode the value will always be set to True. bool, optional, defaults to False) —
Whether or not to use the model in training mode (some modules like dropout modules have different
behaviors between training and evaluation). tf.Tensor of shape (batch_size,), optional) —
Labels for position (index) of the start of the labelled span for computing the token classification loss.
Positions are clamped to the length of the sequence (sequence_length). Position outside of the sequence
are not taken into account for computing the loss. tf.Tensor of shape (batch_size,), optional) —
Labels for position (index) of the end of the labelled span for computing the token classification loss.
Positions are clamped to the length of the sequence (sequence_length). Position outside of the sequence
are not taken into account for computing the loss. Returns
transformers.modeling_tf_outputs.TFQuestionAnsweringModelOutput or tuple(tf.Tensor)
A transformers.modeling_tf_outputs.TFQuestionAnsweringModelOutput or a tuple of tf.Tensor (if
return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the
configuration (MPNetConfig) and inputs.
loss (tf.Tensor of shape (batch_size, ), optional, returned when start_positions and end_positions are provided) — Total span extraction loss is the sum of a Cross-Entropy for the start and end positions.
start_logits (tf.Tensor of shape (batch_size, sequence_length)) — Span-start scores (before SoftMax).
end_logits (tf.Tensor of shape (batch_size, sequence_length)) — Span-end scores (before SoftMax).
hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) — Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape
(batch_size, sequence_length, hidden_size).
Hidden-states of the model at the output of each layer plus the initial embedding outputs.
attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) — Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).
Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.
The TFMPNetForQuestionAnswering forward method, overrides the __call__ special method.
Although the recipe for forward pass needs to be defined within this function, one should call the Module
instance afterwards instead of this since the former takes care of running the pre and post processing steps while
the latter silently ignores them.
Example:
>>> from transformers import AutoTokenizer, TFMPNetForQuestionAnswering
>>> import tensorflow as tf
>>> tokenizer = AutoTokenizer.from_pretrained("microsoft/mpnet-base")
>>> model = TFMPNetForQuestionAnswering.from_pretrained("microsoft/mpnet-base")
>>> question, text = "Who was Jim Henson?", "Jim Henson was a nice puppet"
>>> inputs = tokenizer(question, text, return_tensors="tf")
>>> outputs = model(**inputs)
>>> answer_start_index = int(tf.math.argmax(outputs.start_logits, axis=-1)[0])
>>> answer_end_index = int(tf.math.argmax(outputs.end_logits, axis=-1)[0])
>>> predict_answer_tokens = inputs.input_ids[0, answer_start_index : answer_end_index + 1]